Reaching a specific person or department behind one shared fax number, and the simple dial-string method Fax.Plus actually uses to do it.
- A fax routing extension directs an incoming fax to the right person, department, or mailbox behind one shared fax number.
- Some legacy fax systems used sub-addressing, a signal sent during the fax call itself, to route a fax this way.
- Fax.Plus uses pause characters and an extension added to the dialed number instead of a protocol-level routing signal.
- Up to 10 pause characters can be added to a number, each holding the line one second before the extension digits dial.
What Is a Fax Routing Extension?
A fax routing extension directs an incoming fax to the specific person, department, or mailbox behind one shared fax number, the same idea as dialing an extension on a phone system instead of reaching the main line.
Sub-Addressing, the Legacy Version
Some fax servers support sub-addressing, an optional signal sent during the fax call itself that tells the receiving system which extension to route the fax to, a routing concept similar to how identifying which number was actually dialed lets a phone system route a call. Fax.Plus doesn't rely on this signal.
How Fax.Plus Routes to an Extension
Instead, entering a destination number in Send Fax can include an asterisk (*) for each one-second pause, followed by the extension digits, for example +16692001010****5 dials the main number, waits four seconds, then dials 5. Up to 10 pause characters are supported. It's a dial-string technique, not a protocol-level routing signal, and it works whether the person managing routing for the account sets it up for a shared line, or it simply reaches a dedicated number for one person instead.
A Common Case: One Number, Many Desks
A small back office shares a single fax number across several desks, and reaching one specific person used to mean the front desk relaying every incoming page by hand. Dialing the main number, then a short pause, then that person's extension gets a fax straight to the right desk without anyone in the middle having to sort it first.
Часто задаваемые вопросы
How do I send a fax to a number that has an extension?
Add an asterisk (*) to the number for each one-second pause needed, then the extension digits, for example +16692001010****5. Up to 10 pause characters are supported.
Does Fax.Plus use sub-addressing to route faxes to an extension?
No. Some legacy fax systems used sub-addressing, a signal sent during the call itself. Fax.Plus instead uses pause characters and extension digits added directly to the dialed number.
Featured Articles
See All
Confédération Suisse
Confederazione Svizzera
Confederaziun Svizra
Swiss Confederation
Innosuisse - Swiss Innovation Agency
