Dual-Tone Multi-Frequency, the touch-tone signal a phone keypad sends, and how it differs from the tones a fax connection uses to connect.
- Tone dialing (DTMF) uses a pair of audio tones, one per keypad button, to signal a dialed digit over a phone line.
- DTMF replaced pulse dialing, the older method of dialing by counting electrical clicks.
- A fax connection negotiates over a different tone sequence during its handshake, DTMF itself isn't the signal that carries a fax.
What Is Tone Dialing (DTMF)?
DTMF, short for Dual-Tone Multi-Frequency, is the signaling system behind touch-tone dialing. Pressing a key on a phone keypad sends two simultaneous audio tones, a unique pair for each of the 12 standard keys, that telephone equipment and switching centers decode as a specific digit. It's the same system that lets a caller navigate an automated phone menu or enter a PIN mid-call.
DTMF vs. the Fax Handshake
DTMF is how a call gets dialed and routed in the first place, over the public telephone network, not how the fax itself transmits once the call connects. After the line connects, two fax devices negotiate the actual transmission through a separate handshake, a distinct sequence of tones used to agree on speed, resolution, and error handling before any page data moves. Dialing a saved number through dialing shortcuts like saved contacts and groups still relies on DTMF-based call setup behind the scenes, even when the sender never sees a keypad. Those negotiation tones are a different signal entirely from DTMF, covered in full under fax tones.
A Common Case: Routing Calls Before a Fax Line Even Rings
A regional customer support line uses DTMF tones so callers can route themselves to the right department by pressing a number on their keypad, the same signaling system used to dial any phone number, including a fax line, in the first place.
Preguntas frecuentes
What is DTMF used for?
DTMF tones dial phone numbers from a touch-tone keypad and drive automated systems like IVR menus, voicemail, and conference call PINs. Each keypad button sends its own pair of frequencies that equipment on the other end decodes as a digit.
Is DTMF the same as the tones used during a fax handshake?
No. DTMF dials and routes the call itself over the phone network. Once the call connects, the two fax devices negotiate the transmission through a separate handshake using a different sequence of tones.
Featured Articles
See All
Confédération Suisse
Confederazione Svizzera
Confederaziun Svizra
Swiss Confederation
Innosuisse - Agencia Suiza para el Fomento de la Innovación
